Welcome Guest [Log In] [Register]



You are currently viewing our board as a Guest. Please Join our community!
If you're already a member please log in to your account to access all of our features.

Username:   Password:
Add Reply
Processes with differing layer heights, air gaps?
Topic Started: Apr 6 2018, 12:50 PM (9 Views)
JohnHale
No Avatar
Bronze Armor
 *
Hello,

If I print an object, and specify a process for the bottom of the object to print at say, 0.3mm and stop at 15mm.And then, I start at a new process at 15mm, with a new layer height, say 0.2mm, just in that area to tighten things up a bit.There will be an air gap precisely where the two processes meet. I can see the air gap ONLY in the slicer visual window after it was sliced, in reality, the air gap during the print gets closed up because of gravity.

Please help.

I didn't find the right solution from the Internet.

References:-
https://forum.simplify3d.com/viewtopic.php?f=9&t=3802
Motion Graphics Intro Examples

Thanks


Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Upload Library · Next Topic »
Add Reply