| Welcome to Rcsnowcats. We hope you enjoy your visit. Join our community |
| Igarashi Motors | |
|---|---|
| Topic Started: Nov 3 2017, 12:22 PM (261 Views) | |
| Jeffh | Nov 3 2017, 12:22 PM Post #1 |
|
I found these on Ebay and was wondering if these are any good for the blizzard Electric DC motor manufactured by Igarashi •Model N3657 •Operates on 12 VDC nominal •No load speed at 12 VDC: 4,150 RPM •No load current: 150 mA •Full load (maximum efficiency @ 12VDC) performance characteristics: ◦Speed: 3,550 RPM ◦Current: 1.07 A ◦Torque: 246 g-cm (24.1 mN-m) ◦Power output: 8.98 Watts •Stall torque: 1,700 g-cm (167 mN-m) •Stall current: 6.5 A •Can be operated in either direction, simply reverse power supply polarity •Dimensions (not including shaft): 57 mm long x 37.5 mm diameter •Shaft dimensions: 20 mm long x 3.17 mm diameter •5 pole armature construction •2 solder terminals for easy power connection •Features 2 threaded mounting holes (JIS M3x0.5) on 25 mm centers Edited by Jeffh, Nov 3 2017, 12:23 PM.
|
![]() |
|
| FrozenRC | Nov 3 2017, 07:41 PM Post #2 |
![]()
|
They are extremely low RPM motors. That's the only thing I would say, I put 5000RPM duratrax motors in mine an I had to bump up to 3s, unless you are going for super scale speed. |
![]() |
|
| Jeffh | Nov 4 2017, 09:28 PM Post #3 |
|
Thank you. I’m planning on running 3s but I wasn’t sure if these were the Igarashi Motors everyone runs |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · Electronics · Next Topic » |





10:14 AM Jul 11