Welcome Guest [Log In] [Register]
Welcome to Rcsnowcats. We hope you enjoy your visit.

Join our community

Username:   Password:
Add Reply
SR/FR 540 conversion kit
Topic Started: Aug 1 2017, 06:47 PM (1,055 Views)
Gumbajv

Here's a link to my description with photos: http://s1.zetaboards.com/RCsnowcats/topic/8127300/1/#new
Price is $60.00 for the 2 pinions, 5-m3 set screws, and wrench. Add $10 for a new pair of shortened chains. Or you can shorten your existing ones. Shipping is extra. For the installation you will need 2-80T brushed motors and a Sabertooth rc2x12 esc. Works with either 2S or 3S.
Posted Image
Offline Profile Quote Post Profile
 
Gumbajv

I added a few more parts to make the installation easier. A drilling template that attaches to the side using the existing holes, 4 m3 motor screws with 2 nuts, and instructions.
Posted Image
Offline Profile Quote Post Profile
 
rookie101

Do you have a few of these in stock? I have your old kit and love it, showed this to a couple guys and may need One or two.

Aaron
Edited by rookie101, Oct 23 2017, 09:03 PM.
Offline Profile Quote Post Profile
 
Gumbajv

I’m working on a couple of kits now, and should be ready in a week or so. This kit is an improvement over stock, but not at torquey as your kit. Someone tried the kit with metal tracks, which this isn’t designed for. It took more power to start, and had less slow speed control.
I’m building another chassis using the Sabertooth 2x25 to see if the extra amps will help with the metal tracks using the same 80t motors.
I brushless set up would be better, but I haven’t found a brushless esc that will drive 2 motors.
Offline Profile Quote Post Profile
 
rookie101

I'm running dual castle sidewinder sv3 in mine with the 80 turns. I keep meaning to look into brushless outrunners but haven't gotten around to it.

For mixing I just run a FlySky GT3B that is running the Overkill hack mod, it'll mix any ESCs for you.
Offline Profile Quote Post Profile
 
Gumbajv

I have one kit available now. A couple more at the end of next week. Also have one rolling chassis I used to test the metal tracks with the 2x25 esc. Will post a photo of the chassis and a short video.
Offline Profile Quote Post Profile
 
Gumbajv

Video is here: https://www.youtube.com/watch?v=mC9IcFqXwpQ
Offline Profile Quote Post Profile
 
rookie101

I'll take the kit you have ready. Send me a pm with a price shipped to Calgary Alberta. I still have your paypal in history.

Aaron
Edited by rookie101, Oct 31 2017, 12:22 PM.
Offline Profile Quote Post Profile
 
rookie101

I'll take another kit if you have one ready.

Aaron
Offline Profile Quote Post Profile
 
Gumbajv

Aaron,
I'll have another kit ready next week. I'm ordering more chains. I'll post here when it's
ready.
thanks,
H.
Offline Profile Quote Post Profile
 
Gumbajv

Aaron,
I have one ready.
Thanks,
H
Offline Profile Quote Post Profile
 
Chaz

Aaron is a bad influence cause now that I've seen one I need one too, heh. Lemme know when you have a set in stock.
Offline Profile Quote Post Profile
 
Gumbajv

I’ll have one kit ready tomorrow to ship. Email me your addres to calculate shipping:
Harold@dino.com
Thanks,
H.
Offline Profile Quote Post Profile
 
rookie101

Chaz
Dec 19 2017, 01:00 AM
Aaron is a bad influence cause now that I've seen one I need one too, heh. Lemme know when you have a set in stock.
Ha ha. Now run dual SV3's and your hacked FlySky, you wont look back!
Offline Profile Quote Post Profile
 
rookie101

Looks like I need another one as well when you have one ready.
Edited by rookie101, Dec 24 2017, 03:10 PM.
Offline Profile Quote Post Profile
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Buy/Sell/Trade · Next Topic »
Add Reply