Welcome Guest [Log In] [Register]
Welcome to Rcsnowcats. We hope you enjoy your visit.

Join our community

Username:   Password:
Add Reply
Why are the Red and Green Lights Flashing?; My Kyosho Blizzard SR stopped working
Topic Started: Mar 5 2017, 11:55 PM (385 Views)
Ron666

Hello everybody. I have experienced a problem with my Kyosho Blizzard SR (the red one). Recently I turned the machine on first and then the transmitter. Immediately the machine began beeping and "Red and Green" lights began flashing on the speed controllers. I turned the machine off and tried to restart it and again the same problem.

NO matter how many times I try to start the machine, the lights flash and nothing happens. What is going on here? How do I fix this? Any assistance will be very much appreciated.

Thanks kindly, Ron666
Offline Profile Quote Post Profile
 
rknaub

Not sure how the radio system works in the SR, but typically you will always need to turn on the transmitter, before the vehicle. Again, not familiar with that particular radio, but maybe it lost its bind, and possibly you need to rebind the receiver to the transmitter. Not quite sure the process on that, but I'm sure google will turn out the results.
Edited by rknaub, Mar 6 2017, 03:18 PM.
Offline Profile Quote Post Profile
 
Ron666

rknaub
Mar 6 2017, 03:17 PM
Not sure how the radio system works in the SR, but typically you will always need to turn on the transmitter, before the vehicle. Again, not familiar with that particular radio, but maybe it lost its bind, and possibly you need to rebind the receiver to the transmitter. Not quite sure the process on that, but I'm sure google will turn out the results.
Thanks for the help. I did make a major "boo boo" by turning on the machine first and then the transmitter. I never though of this possibility, but yes it could be possible that the binding between receiver and transmitter has been lost.

Thanks Ron666
Offline Profile Quote Post Profile
 
Ron666

Well I tested out that idea and it turns out that binding between transmitter and receiver is not the problem. The two are indeed "bound and working perfectly together. Two of the circuits work, but two do not. So clearly something is fried out, but what?

Ron666
Offline Profile Quote Post Profile
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Electronics · Next Topic »
Add Reply