Welcome Guest [Log In] [Register]
Welcome to Rcsnowcats. We hope you enjoy your visit.

Join our community

Username:   Password:
Add Reply
SR chassis w/540 direct drive
Topic Started: Nov 23 2016, 05:26 PM (512 Views)
Gumbajv

Selling a used SR chassis with a 540 direct drive conversion. The 2 machined motor adapters work with either 1/8" or 5mm shafts. They are currently set up with 5mm to 1/8" reducers. The adapters use the stock SR small plastic sprockets. The motors are new RC4WD 80T motors, and a new Sabertooth 2x12 rc esc, and new Crawford Engineering servo. Also included is a used plow set up. Also included are a bunch of new SR misc. parts. Everything in the first photo. Add a receiver & body and your ready to roll. Price is $225.00 + shipping & paypal.
Posted Image
Posted Image
Posted Image
Posted Image
Offline Profile Quote Post Profile
 
blowout
Member Avatar

So would that make it make fast or have lots of torque
Offline Profile Quote Post Profile
 
Gumbajv

Fast, 14mph with 3S lipo, 17mph with 5S lipo. Probably faster on a smooth surface with more room. Pretty good torque, I was going up some fairly steep dirt hills with no issues using a 3S lipo. I'm sure it will push snow. That being said, it can't crawl slowly. I use a Futaba transmitter with a dual rate switch. I set it at 40% to go slow, and 100% to go fast.
Offline Profile Quote Post Profile
 
blowout
Member Avatar

Ok I'm just looking for something better then stock and good when I have the snowblower on the front
Offline Profile Quote Post Profile
 
chbronco

Don't need the motors, esc or the servo and parts whats the price? very interested.
Offline Profile Quote Post Profile
 
Gumbajv

I'm not interested in parting it out.
Offline Profile Quote Post Profile
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Buy/Sell/Trade · Next Topic »
Add Reply