| Welcome to Rcsnowcats. We hope you enjoy your visit. Join our community |
- Pages:
- 1
- 2
| Blizzard SR studdering | |
|---|---|
| Topic Started: Feb 16 2014, 01:03 PM (1,364 Views) | |
| dbosche | Feb 17 2014, 01:43 PM Post #16 |
|
I thought maybe it could be something with the Sabertooth, but the problem only starts after running for sometime. Usually 15 or so minutes and it has been really cold lately too! Not sure if that has anything to do with it. |
![]() |
|
| FrozenRC | Feb 17 2014, 03:05 PM Post #17 |
![]()
|
You could try turning on the LiPo low voltage option on the sabertooth, if it cuts in then battery capacity/charge could definitely be the issue. |
![]() |
|
| dbosche | Feb 17 2014, 04:27 PM Post #18 |
|
So I have purchased a BEC to run the rear tiller, but it has a plug running off it with three wires and the tiller only uses two. Which two should I use? Or does it matter? |
![]() |
|
| FrozenRC | Feb 17 2014, 04:35 PM Post #19 |
![]()
|
Got a pic? |
![]() |
|
| dbosche | Feb 17 2014, 05:29 PM Post #20 |
|
I got it working. Thanks again for your help. |
![]() |
|
| blowout | Feb 18 2014, 01:15 AM Post #21 |
|
OK dumb question but how does the BEC work and make things work better? |
![]() |
|
| FrozenRC | Feb 18 2014, 01:33 AM Post #22 |
![]()
|
Check this post blowout http://www.rcuniverse.com/forum/electric-rc-helis-167/7683693-explaination-bec.html |
![]() |
|
| blowout | Nov 15 2016, 05:34 PM Post #23 |
|
Going to bring this thread back to life. Update on my issue I got a 6v 3a I believe bec from my brother and put a glitch buster in. Still having the same problem. Trying to get all the bugs worked out and stuff moved around in there so I can make room for blower components
Edited by blowout, Nov 15 2016, 05:36 PM.
|
![]() |
|
| Nouseforaname | Nov 18 2016, 08:06 PM Post #24 |
|
If you get hesitation on full throttle start you may be hitting over current protection. I had this problem when I tried a sabertooth in mine. (error led would flash when it hesitated, which means over current protection) Turning acceleration ramping on (switch 4 down position), may help. |
![]() |
|
| blowout | Nov 19 2016, 12:29 AM Post #25 |
|
Turned that on not as bad now |
![]() |
|
| Nouseforaname | Nov 19 2016, 11:43 AM Post #26 |
|
Its going into over current protection. If you try it when you can see the esc the led will flash when it stutters. |
![]() |
|
| blowout | Nov 20 2016, 01:01 PM Post #27 |
|
I did notice the red led coming on when it does it. Think it might be time for some better esc's. |
![]() |
|
| Nouseforaname | Nov 20 2016, 02:08 PM Post #28 |
|
That's what I did, got tired of trying to find the best brushed motor, went brushless, Castle was on sale at the time and my sabretooth was under 30 days old and was able to return it (Robot shop is great to deal with). Went 4100kv, didn't want it too fast, plus the crawler reverse setting has no reverse delay. Edited by Nouseforaname, Nov 20 2016, 02:09 PM.
|
![]() |
|
| blowout | Nov 20 2016, 03:46 PM Post #29 |
|
I'm staying brushed for now. Going to get two hobbywing esc's for it. |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · Electronics · Next Topic » |
- Pages:
- 1
- 2





10:14 AM Jul 11