| RUN BY BIKERS FOR BIKERS Pride In What You Ride ![]() We hope you enjoy your visit. ABOUT piwyr : Spoiler: click to toggle If you're already a member please log in to your account to access all of YOUR features. |
| INFO: - Think You Have a "Fuse" Problem For Your Chinese Gas Motor Scooter?[img]http://tinyurl.com/mww4fg[/img]; CHECK IT OUT: - The fuse box connectors in these scooters are very cheap quality. I recommend replacing the.. | |
|---|---|
| Tweet Topic Started: Monday, 7. September 2009, 07:43 (122 Views) | |
| Post #1 Monday, 7. September 2009, 07:43 |
pops
|
|
:OLD: Think You Have a "Fuse" Problem For Your Chinese Gas Motor Scooter? Want Some Solutions? By Mark A. Kemp Many of us have scooter that have starting or stalling-out problems. For some of us, it's the whole fuse setup that is causing our problems, and here are the top 3 solutions. There is a small fuse box next to the battery on the main red battery cable. There is a fuse inside that white plastic housing. It also has an extra replacement fuse in most of these scooters. When our scooters don't start or start to stall on us, we check the fuse first in our repair shop; so I suggest everyone try that step as well. I have had a few cases that the fuse looks fine, but we replaced it anyways with the extra fuse, and the scooter started right up. First of all, realize that might be one solution; but here is another unknown problem and solution we might not know that is happening at the same time: We've replaced the fuse and the scooter starts up, so we think we solved the problem, when actually we didn't. What we didn't know is that the fuse that was already in there, was working just fine. The new fuse worked because we worked with the fuse holder replacing the fuse, not realizing the problem was the fuse holder. By simply playing with it, it made contact again and the scooter started. Sometimes these plastic cases melt and can cause a short. Even if it doesn't look melted, it doesn't mean it's making a good connection. The fuse box connectors in these scooters are very cheap quality. I recommend replacing the holder unit, the clips with a more heavy duty connector clip, and of course, the fuse. |
REAL RIDERS and OWNERS HERE !! piwyrmanagement@gmail.com
|
Quote Post JUMP
|
Member Offline (No PM)Full Profile Page |
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · → • BIKE / RIDER ADVICE · Next Topic » |
HYOSUNG - KYMCO 



Registration is simple, fast, and completely free.
REGISTER HERE !!


JUMP
12:27 PM Jul 11


JUMP