P.I.W.Y.R.

( Pride In What You Ride ) Birthdays & Events: Calendar

piwyr HYOSUNG - KYMCO

- QLINK - CFMOTO - MEGELLI - JOHNNY PAG - Blog / Forum

Welcome Guest [Log In] [Register]


RUN BY BIKERS FOR BIKERS
Pride In What You Ride
Posted Image

We hope you enjoy your visit.

     ABOUT piwyr :
Spoiler: click to toggle

If you're already a member please log in to your account to access all of YOUR features.

Username:   Password:
Add Reply
GEAR: - Useful Accessories For Motorcycle Nitrous Kits; PIWYR NEWS: - to help with getting one's to work properly and at its best level.
Topic Started: Tuesday, 1. September 2009, 01:59 (196 Views)
Posted Imagepops
:OLD:

Useful Accessories For Motorcycle Nitrous Kits
By Marc Galeazzi


When working with one's motorcycle nitrous kit it will help to use a couple of materials. These accessories are ones that can be used to help with getting one's to work properly and at its best level.

A flow test tool is one of the most useful accessories. This tool works as a material that measures the fuel pressure that goes into the kit. It specifically checks on the flowing pressure of the material. It works to help to see that the pressure is at the proper level so that the nitrous kit will work properly and at its most efficient level.

A purge valve kit is another helpful material. It works as a setup that helps to purge air from the wires in the kit so that the nitrous works instantly without any delays.

A blow down tube is another accessory to check out. This is a tube that moves nitrous that is discharged from the kit from a blow-off cap to an area outside of the kit. It is an accessory that can be mounted along the bottle used and can be up to two feet long in some cases and can be used as a substitute for the safety valve used on the nitrous setup.

In some cases the lines used can be difficult to handle because they may not fit around a motorcycle properly. A tube bending tool can be used as an accessory to help with getting it to fit properly on the vehicle. A bending tool will work to create curves in tubes and can work on 3/16 inch hard lines that are commonly used in many installations.
Member Avatar
REAL RIDERS and OWNERS HERE !! piwyrmanagement@gmail.com
Quote Post Goto TopJUMP

Member Offline (No PM)

Full Profile Page

1 user reading this topic (1 Guest and 0 Anonymous)
ZetaBoards - Free Forum Hosting
ZetaBoards gives you all the tools to create a successful discussion community.
Learn More · Register for Free
« Previous Topic · • Other Accessories · Next Topic »
Add Reply

  Follow us on:   facebook    stumbleupon   digg.com    blogspot/   sites.google.com

Bookmark Bookmark this page to more:
<


imageNavigationFORUM NAVIGATION LINKS -+
MAIN FORUM CATEGORIES



Click Here -

LARGE VERSION: RevolverMap displays the visitor locations and recent hits live and in realtime.

Subscribe to piwyr-updates.blogspot.com in a reader
JUMP



This website is used for entertainment only.
FAIR USE :This site contains copyrighted material which has not always been specifically authorized by the copyright owner.
In accordance with Title 17 U.S.C. Section 107, the material is distributed without profit. We believe this constitutes a 'fair use'.