| Viewing Single Post From: possible source of the nanothermite chips | |
|---|---|
| TDX | Apr 21 2009, 09:51 AM |
|
There is one thing which baffles me- the quantity of the unignited nanothermite, it seems to be in rather large multi-ton quantities, standard explanation (that these chips were in close contact with steel, therefore the....) is not acceptable, becuase the surface area of the charges would have to be very large and the ignition temperature (around 430°C) would cause the thermite burn no-matter-what inside the charge. Instead, I propose that the unignited thermite came from unignited charges Our preparators had to knock the towers down, but they couldn't be sure with the exact extent of the fire and airplane damage, so what they did was to put far more charges than necessary. During the last few seconds of the precollapse preparation one of the charges cut the critical column, while the other charges were still burning (the burning couldn't be synchronized, even when using nanothermite), or unignited, then the collapsing floors destroyed the unignited charges and forced the chips into air. The stream of molten metal (NE corner), which was seen during the precollapse preparation of south tower, but what you don't know is that there was a significant amount of red dust during the first 2-3 seconds of the collapse, the movement of the dust suggests that it consists of relatively small particles, therefore it is not cooling molten metal. The most probable theory is, that the molten metal came from thermite charges, which were dislodged by the aircraft impact (the charges were originally intended to cut some of the 1000 or 900 row core columns in the building), unfortunately the spacing of the exterior columns prevented the charges from escaping the building, so they remained inside the debris pile, some of them ignited (the yellow molten metal) and some of them didn't go of (the red dust during the collapse). |
 |
|
| possible source of the nanothermite chips · World Trade Center | |
1:18 PM Nov 30
