Welcome Guest [Log In] [Register]


Add Reply
Screen door installation method
Topic Started: Nov 17 2015, 02:22 AM (4 Views)
meishengchao

Today, in developed cities, the subway or the bus station desktop has been very popular, I wonder if you have noticed that when you wait subway, in front of a platform to track and split open closed doors. This door is a screen door, and install platform screen doors in the subway as well as supporting the waveguide outlet gold and observation windows are a must,fire rated deck Nottingham take a look at the following install them now! Screen Door Installation: 1, the screen door in the handling and installation, the need for doors, door frames and sealing sealing knife reed effectively protected from deformation or damage caused by collision.

2, shielding frame vertical, horizontal correction should be installed, connected to the openings between the shield case should be solid, reliable and seamless. 3, when the doors installed, you should first pair of mounting holes leaf hinge on the door frame positioning correction, and then secure all fasteners. 4, manually install platform screen doors opening and closing mechanism, after electrical or pneumatic devices, door closed case for testing. Test structure should be reliable, flexible rotation, sealing knife and hermetically sealed reed contact. 5, after installation, should be tested at various contact. After tested,outdoor patio flooring materials to spray anti-rust paint. During this process, respond seal knives and were covered hermetically sealed reed shall contamination. Waveguide outlet and an observation window before installation should be handled as follows: 1, the waveguide surface paint and rust steel wall outlet and contact surface scraping bright and uniform lining of tin.

2, the bracket and siding waveguide outlet keel welding or with screws, not undermine the wall. All the brackets should be straight and firm. 3, observation window on both sides of the lens and the intermediate waveguide or metal window frames were observed mosaic firm, tight. Window frames and siding more contact surfaces should be uniform lining of tin. Waveguide duct and an observation window on the siding components should be installed reliable, straight.temporary privacy fencing discounter 4, the waveguide duct and an observation window, the outer contact surfaces must be soldered tight formation. 5, according to the design requirements for welding mouth coating conductive paint, rust, brushing should be uniform without omission.
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Forum Number One · Next Topic »
Add Reply




Skin orginally created by Tariq | Converted by Lewis of the ZetaBoard Theme Zone