|
meishengchao
|
Jun 10 2015, 05:37 PM
Post #1
|
|
- Posts:
- 1,554
- Group:
- Members
- Member
- #281
- Joined:
- May 7, 2015
|
Processes and methods of maintenance is very simple. Maintenance workers to use professional tool to damage the floor where to dig, thus exposing the intermediate layer. Next, the remaining time maintenance workers got the floor pavement floor, remove the piece and gouged tile floor almost as large as the surface layer. Then the tiles were dug into positions, through contrast and finishing no error after the patch smear glue into the trench with the original floor bonded together. Good adhesion can still be seen on the ground after a small gap. After Putty to fill the using decking retaining wall, you can resume normal results. Maintenance worker with Putty to fill the gap, the floor almost do not see traces of patched. Three solid wood flooring is a surface layer, an intermediate layer and back together to form a three-wood criss-crossing, the surface layer having a thickness of solid wood, mainly wood natural texture, thickness of 3-4 mm, When local repair, actually just put its local wood block cut surface was replaced, the floor of the intermediate layer and the back are intact, so you can easily implement local repair. Because the three-layer parquet surface layer of wood used is usually common, so even after years of use for local repair, consumers can often find the same surface layer of wood to be replaced, not complicated. With this unique advantage, just a very simple task, to solve the big problems Dai living room. From a resource point of view, China's three parquet table thickness of 3-4mm, hard wood is used, and the total thickness of the core and back 11-12mm, basically a few years of fast-growing raw material, that is, said that more than 70% of composite outdoor decking inside, 30% is a rigid timber, saving a lot of hard wood, it is conducive to recycling economy.
|