| Viewing Single Post From: How to hook up a router..... | |
|---|---|
| CapwnD | Jun 26 2009, 03:23 PM |
Cobra Saboteur
|
There is no software to install. You're thinking of a "startup disc" or something. I've seen those. You don't need that at all. You just log into the router from your PC... you do that by typing the IP address of the router in your web browser address. Linksys are 192.168.1., Dlink are 192.168.0.1, and most others are one of those two addresses. You run the setup from the router's settings, it will detect whether it's a PPPoE connection like DSL where you log in, or a cable connetion where you don't log in. That's really the only hard part, is if you have a DSl connection. You should log into your MODEM (same way you log into the router, just put the IP address of the modem in the web browser address) and put the modem in bridged mode, then run setup on the ROUTER and enter your PPPoE info in the router instead of the modem. |
 We Were, of course, All Ninjas | |
 |
|
| How to hook up a router..... · Tech Talk | |
 2:48 PM Dec 6
|
Theme Designed by McKee91
Hosted for free by ZetaBoards
