Welcome Guest [Log In] [Register]
Add Reply
ROG VI APEX detects only 2/4 Ram Modules correctly?
Topic Started: Feb 13 2018, 11:08 PM (3 Views)
MichaelMorin

Hi,

I got a somewhat strange problem with my new ROG Rampage VI Apex board in combination with a 4-Dimm (4x16gb 3000mhz) Corsair Vengeance DDR4 3000mhz kit: the board has its latest bios applied (September 15th 2017) and all 4 ddr4 modules are installed on the board, however the board/bios and therefore also OS only detect 2 of the modules correctly and consequently only 32 out of the 64 expected GB.

Detecting correctly as in - inside the bios the SPD information displays the full information for two of the modules only, for two other modules it displays the information only partially (see attached screenshots), albeit some of their information is there.


Now I tried shuffling the modules in the slots but no change - 2 out of 4 are fully detected.. two are not. I also re-tried all 4 modules in the original system I pulled them from .. and all 4 work perfectly fine there. I also tried loading the bios defaults - no change.. the ROG Rampage VI Apex does not properly recognize all 4 of them.

Does anyone know what's going on here / how I could get the board to recognize all 4 of the modules?

Please help.

Thanks!

I didn't find the right solution from the Internet.

References:
https://rog.asus.com/forum/showthread.php?96794-ROG-VI-APEX-detects-only-2-4-Ram-Modules-correctly

Video animation cost

Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · General Discussion · Next Topic »
Add Reply